GARDEN SPRINKLERS Archives - Designer Watering Systems

Clamp, Poly Ratchet, for standard 4mm tube; Suits outside diameter 6.5mm – 8.1mm (thinner walled Tube may require smaller 30315 clamp)

designerwatering — Fri, 24 May 2024 01:40:35 +0000

The post Clamp, Poly Ratchet, for standard 4mm tube; Suits outside diameter 6.5mm – 8.1mm (thinner walled Tube may require smaller 30315 clamp) appeared first on Designer Watering Systems.

Goof Plug, 5mm rack of 10

Dominic Tan — Wed, 13 Feb 2019 13:12:52 +0000

to plug incorrect 5mm holes made in Low Density poly sprinkler pipe

The post Goof Plug, 5mm rack of 10 appeared first on Designer Watering Systems.

Micro spray 360º, Mister, 0.25mt diameter, 2 piece Yellow & Black with 4mm thread

Dominic Tan — Wed, 13 Feb 2019 13:12:51 +0000

use in the centre of a small group of Plants, or for 1 Plant; 0.45 Lt/min

The post Micro spray 360º, Mister, 0.25mt diameter, 2 piece Yellow & Black with 4mm thread appeared first on Designer Watering Systems.

Micro sprinkler, 360º Spinner, 2.5mt radius, Green with 4mm thread

Dominic Tan — Wed, 13 Feb 2019 13:12:51 +0000

for centre of garden position; 1.5 Lt/min; Prefer no more than 2.0mt to next sprinkler to prevent sprinklers from becoming overgrown.

The post Micro sprinkler, 360º Spinner, 2.5mt radius, Green with 4mm thread appeared first on Designer Watering Systems.

Joiner, 4mm barb / barb

Dominic Tan — Wed, 13 Feb 2019 13:12:42 +0000

The post Joiner, 4mm barb / barb appeared first on Designer Watering Systems.

Joiner, 4mm barb / thread

Dominic Tan — Wed, 13 Feb 2019 13:12:42 +0000

The post Joiner, 4mm barb / thread appeared first on Designer Watering Systems.

Flex tube, 4mm x 10mt

Dominic Tan — Wed, 13 Feb 2019 13:12:39 +0000

The post Flex tube, 4mm x 10mt appeared first on Designer Watering Systems.

Flex tube, 4mm x 25mt

Dominic Tan — Wed, 13 Feb 2019 13:12:39 +0000

The post Flex tube, 4mm x 25mt appeared first on Designer Watering Systems.

Stake & Tube, thinner stake, 4mm barb joiner

Dominic Tan — Wed, 13 Feb 2019 13:12:37 +0000

This is probably the best Stake & Tube we’ve ever had in our actual / physical Shop, but there is sprinkler fitting technique. No heads breaking off, no tube coming off joiner, no tube kinks.

Problems with incorrect techniques:

Pull tube out through top of bracket, screw sprinkler in, and water pressure will force sprinkler out (especially on a hot day when tube gets soft).
Screw sprinkler into tube inside bracket, and sprinkler will probably push tube through as you go, so you won’t get a decent attachment and water pressure will force sprinkler out.

Correct technique: Ensure tube is level with top of surrounding bracket, grab tube and stake by the throat (under the bracket) so the tube cant’s slip through when screwing in the Sprinkler, then screw in the Sprinkler. Being that you’re screwing into tube rather than cutting a thread into a plastic head, you can actually turn the Sprinkler that little bit further for better angle alignment.

The post Stake & Tube, thinner stake, 4mm barb joiner appeared first on Designer Watering Systems.

Stake, Clip Stake, 310mm (standard)

Dominic Tan — Wed, 13 Feb 2019 13:12:37 +0000

supports 4mm micro spray Riser

The post Stake, Clip Stake, 310mm (standard) appeared first on Designer Watering Systems.